|
|
|
|
 |
|
|
|
|
|
|
Loading Bay Accessories - PE Dock Bumpers
|
A highly durable dock buffer with a unique construction and patented materials, giving superior performance to conventional rubber bumpers - more durable, low friction face, no exposed fixings.
Prevents damage to the loading bay and to vehicles during reversing, loading and unloading.
Unique construction
The buffer comprises a replaceable front pad, rubber cushioning strips and steel back casing, of patented materials.
Extremely robust
Very resistant to high impact and frictional forces.
The low coefficient of friction of the pad reduces frictional forces due to movement of a vehicle during loading/unloading, when the vehicle is parked in contact with the buffers.
No exposed fixings
No fixings are exposed on the front face of the pad.
The back plate is mounted directly on the dock face with minimum bolt projection covered by the front pad.
Durable
More durable material than rubber bumpers. The front pad is easily replaced if necessary.
Environmentally friendly
Completely recyclable.
Rapid payback
Short payback period due to the reduction in damage to dock front and vehicles.
Components
The buffer consists of an ultra high molecular polyethylene front pad, two rubber cushioning strips and a hot-dipped galvanised steel back casing and retainer.
The cushioning strips spread impact forces over the entire buffer surface.
Front pad can be black or yellow polyethylene or yellow nylon.
Size
Overall: 220 wide x 554 or 814mm high.
Depth: 140mm.
Height of front pad: 490 or 750mm.
|
|
|
Loading Bay Accessories - Rubber Dock Bumpers
|
|
Stertil Stokvis rubber dock bumpers provide good protection to the dock front against vehicle impact.
Standard bumpers are rectangular.
L-shaped bumpers are available where a wider docking area is required.
Vertically movable bumpers have a pad which can move vertically up and down, following the movement of the vehicle during loading/unloading. This avoids stress on the fixings, giving the bumper a longer life.
Sizes
Rectangular bumper
Width x height 250 x 450mm, depth 100 or
150mm.
L-shaped bumper
Width x height 450 x 450mm, depth 100mm.
Vertically movable bumper
Width x height 210 x 540mm, depth 170mm.
Options
Raised bumper brackets
Bumper packers
Precast mounting plates
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
